Blue Sea Systems 7615 ATD Automatic Timer Disconnect

Packaged for retail use only. For bulk product, see item 78030B (must be logged in to purchase bulk)

• Blue Sea Systems 7615 ATD Automatic Timer Disconnect
• Category: Battery Chargers
• Manufacturer: Blue Sea Systems
• Can be configured to be used as one of the following battery saving products
• Sealed to IP67

Timer Disconnect

• 12VDC signal triggers relay to connect battery power to devices
• When signal is removed the time is activated and will disconnect devices after a preset time
• Timer ranges from 15 minutes to 4 hours

Low Voltage Disconnect

• Senses low battery voltage and automatically disconnects devices
• Low voltage setting can be used in conjunction with Timer Disconnect. Low voltage will disconnect devices prior to preset time to preserve battery power

Automatic Charging Relay

• Automatically combines two batteries when charging, and isolates them when discharging
• Single side sensing only monitors the voltage of the start battery
• Ideal for auxiliary batteries that are AGM or significantly larger than the start battery

Solenoid

• 12VDC signal will connect or disconnect relay without any time delay  
• Nominal Voltage: 12VDC
• Amperage Operating Current: 175mA (closed) 4 mA (open)
• Terminal Stud Torque: 140 in-lb (15.82 Nm)
• Continuous Rating: The maximum current a switch is designed to conduct for an indefinite period - 120A
• Intermittent Rating: The maximum amount of current a switch is designed to carry for a minimum of a designated period of time - 210A (5 min)
• Cable Size to Meet Ratings: 1 Ga. (50mm)
• Charge Sense Connect: 13.0V (3 sec.)
• Charge Sense Disconnect: 12.75V (10 sec.)
• Disconnect Time: 5 sec, 15 min, 30 min, 1 hr, 1.5 hr, 2 hr, or 4 hr
• Input Voltage Range: 9.5-16VDC
• Low Voltage Disconnect
• 11.0V (10 sec.)
• 11.5V (10 sec.)
• 12.0V (10 sec.)
• Maximum Cable Size: 1/0 Ga. (50 mm)
• Terminal Ring Diameter Clearance: 1.12" (28.45 mm)
• Terminal Stud Size: 3/8" -16 (M10)
• Over Voltage Lockout: 16.0V (5 sec.)